Separate names with a comma.
Thanks for the info Luis. I built the crossover for my center channel from scratch. It worked alright, but was, a hassle. This time, I bought a...
Both boxes built. Was tempted to follow your advice, Luis, but just made smarter use of the clamps I have. Today I start on the crossovers and...
Got one cabinet glued up. I didn't have enough clamps (or energy) to do both, but here's one. Notice the braces line up with the joint lines on...
I hate to admit it, but I can't get the file on my new computer where I can find it and add it to my post. Pretty lame, I know. I'll figure it out...
Ok, I have all the pieces cut out. (and produced about a cubic foot of MDF dust). Just have to smooth the holes in all the braces. Then it's time...
I ended up using MDF from Lowes, which is only about .008 thinner. If you lay the parts face down while clamping them up, they come out flush on...
I'm not planning to do anything because the joints seem really strong, but it would be easy to glue a reinforcement to the inside. I built the...
I wanted a 893 ported towers to go with my sealed 893 center, but wanted the tweeter to be at ear level. In order to get the cabinet dimensions I...
Thought so. The more I look, the more I'm impressed! You have blurred the line between 'master craftsman' and 'artist' Another important question:...
Nice work! I'm curious about the finish on your veneer. I'll be doing veneer on my cabinets soon, and would like to achieve that kind of sheen....
I hope I can get my veneer to look that good.. My cabinets will be similar, but shorter and deeper. I still have the PCBs I got from you, so all...
I finally decided to quit talking about it, and pull the trigger. I'll build 70 liter cabs tuned to 39 Hz. My hi tech approach to getting the...
Yes, those plastic tubes are called 'stand offs' - just spacers to keep the PCB off the cabinet. You need to be sure that your crossover location...
"INP" stands for input, so that connects to the binding posts. "HI" is connected to the tweeter assembly, and "LO" is for the main driver (woofer)...
https://www.walmart.com/ip/Mainstays-1.25-Convoluted-Foam-Topper-Multiple-Sizes/10055840 The pink R13 will work fine - but it's itchy stuff..
No problem - just buy a recessed terminal cup like this: http://www.diysoundgroup.com/accessories/terminals/square-tc1.html
Titebond II is my favorite glue for this sort of thing. It is easily strong enough for your project. Other glues work well, but none better. I...
My room is about 18 X 45, if you include the kitchen and dining room that are mostly open to it. 10 ceilings too. It takes large speakers to fill...
I don't want to hijack the thread, but Nolan, when you started talking about your 893, it made me wonder how well the HTMs worked with it. I also...
You could cut off the round-overs, and then mount the baffle inside the walls of the cabinet. Just cut 3/4" off each edge, and build the box 3/4"...