Separate names with a comma.
Yes that is correct.
The LO+ and LO- on the board go to the woofer in the Volt-6. LO+ to the woofer + and Lo- to the woofer -. You can use .205" or .250" quick...
The Volt-6's don't have too much baffle step built in, so I would recommend leaving the crossover as is. It was designed with the thought that it...
Yes placing a piece of fiberglass across the back should be done to minimize rear wave reflections within the wall/ceiling cavity. The ceiling...
DATS V2 reading from the sample. Should be all you need to load into something like WinISD (do so in that order), let me know if you need any of...
You could experiment with it, should not be any excursion issues for the woofers if you use a high pass of at least 80hz and are not giving them...
A: None of the above! The problem is that you cannot measure components once they are wired together in the crossover as there are alternate...
Yes I believe that was added to the new boards.
Those look great Bill, you inspired me to build a set of diffusers. Unfortunately I could not use your design due to space constraints from...
I missed your post earlier, it has been a busy week for me, are you still in the area for this weekend? I may be able to host you for a demo on...
That is sort an open ended option. There is no real plan for building them into a ceiling because every situation may be different. The easiest...
I made a quick video showing how to assemble a crossover for any of the DIYSG kits that include a PCB. [MEDIA] I may update this post and add...