Separate names with a comma.
If these will be powered by the AVR a highpass should not be necessary as the drivers will be safe from over excursion damage at AVR power levels....
Thanks, For surrounds any of the popular choices should work well, Volt's, Fusion, HTM's or more Titan-615's. :D There isn't really a surround...
More info... Here is a measurement showing low frequency rolloff, the original graph does not represent the LF performance below 100hz that well....
Official thread for the Titan-615 and Titan-818 designs [IMG] This design was conceived while I was down at Erich's shop helping him with a some...
Running the sealed volt-6 with an 80hz crossover should not be a problem on AVR power, you just won't get as much output out of them at <120hz as...
I'm not totally sure there is enough depth there for the coaxial to be placed at the bottom of the enclosure. I have a feeling the compression...
With coaxials it does not matter which way the cabinet it positioned, so yes you can definitely place them sideways if needed. There is also no...
First the Volt-6's might not be ideal as ceiling speakers for background music and such around the rest of the house as they need a subwoofer to...
The Nexus Tower is designed as a full range speaker, no need for subwoofers for music playback. All the high efficiency SEOS kits do need...
It's small, about 1-1.5dB but since it pulls everything above 1.5khz down by that much it makes a noticeable difference. These speakers are...
Might be a little while, going to be working on getting a custom neodymium motor 8" driver made for it but have yet to get any samples. The HTM-6...
The woofer used is the last of those three part number 295-484. Unfortunately you can't switch the drivers without a complete redesign of the...
I have not directly compared the HTM-12 to the 1099, that said the HTM-12's sound is similar to the Fusion-15 so I would look to the comparisons...
Thanks, The HTM-10's might give you a little more chest thump over the Fusion-8's as I did design them with a little bit of a midbass bump but...
While I think the Volt-10's might have the sound you are looking for and while I have tested them with about 400w input which they handle fine I...
The inside flares likely won't be an option, I have a bunch of port samples here that do have inside flares but none are the correct size/length...
There will be pre-assembled crossovers offered soon. The kits will come with a single 1" thick baffle which does not need the inner baffle...
Added that info to the first post.
Was working on getting those off my laptop, added the on axis, still need to process the off axis files. Some other HTM photos added here since...
Thanks. Gross internal volume (not subtracting for bracing or drivers): ~1.8 cuft for the HTM-12 ~1 cuft for the HTM-10 ~0.375 cuft for the...