Separate names with a comma.
Update, I can install the dust caps on the newer batch of drivers with the custom silver back-plates if requested. I just did 6 of them and the...
Nexus Cabinet Cut Lists: Nexus TM: Using 1/2" material for the cabinet and 3/4" for the baffle, Overall Cabinet Dimensions - 10"H x 7"W x 9"D:...
It's sort of similar to an open baffle in that you use contributions from the rear wave of the driver. Though in this case you are trying to...
I had planned to build a test a pair of subwoofer cabinets that I dubbed the Bassic-10 and Bassic-12. These were just to be a simple easy to build...
I've been wanting to experiment with some kind of passive cardioid implementation on a speaker like that. I'm sure it would work well with the...
I really don't know how they will behave/sound open baffle, I ran a quick sim and it looks like the standard crossover would work if you build the...
These coaxials aren't built by eminence, that said the Alpha-8A has very close T/S specs to the woofer on this. For the Concentric-6 I can't...
They are just short blocks that tie the baffle and rear wall together, they do not partition off that section into separate chambers.
You don't have to disregard all posts, anything you see posted after 2018 for the MTMWW tower design will obviously be relevant as that's the last...
Yes the 2018 crossover revision for the MTMWW tower design is the current model. The build info on those first 6 posts has been kept updated with...
You can rotate the design sideways but you are correct this now means if you move horizontally you may end up in cancellation nulls between the...
In that case either way should be close enough being a couple Hz difference between the two, which is probably unnoticeable in room.
If using 4" PVC without flared ends I'd make it about 10.5" long.
Yeah if you want all three to match perfectly then you can do that, I had a post a few pages back talking about that change:...
Sorry for the delay, here is a 3d model of the cabinet with all pertinent dimensions: [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Yes I still have bare PCBs and can cut baffles as well.
Yes still have 8 of the drivers.
I don't envision any major issues from those changes.
Hi Dane, The baffle design I posted here fits these flat packs from Parts Express if you wanted to go that route? They would certainly work...
Crossover Info: Like I said above I retested the design and made some slight adjustments to the crossover largely focused on improving midrange...