Separate names with a comma.
I've sent you a PM.
Boards arrived earlier then I expected. I still need to grab some photos but I've got a few sets of parts here and could start taking orders for...
I posted the enclosure specs in the thread on AVS Forum: https://www.avsforum.com/threads/diysg-vortex-15-builds.3206159/page-18#post-61186901
I'd say It's closest in size and performance to the S2000 kit but obviously the use of the ribbon tweeter in this design is a major difference...
For lack of better words the 15" had a slightly bigger sound to it with more full bottom end. Otherwise pretty similar.
There are the disconnects I usually use: 0.205" 1/4" I have these crimpers which I find work nearly as well as my nicer ratcheting crimpers for...
44Hz. I updated that post. I original listed just those values needed to be entered into WinISD to auto calculate the remaining parameters but...
I do have the original Fusion-6 cabinet and drivers I could throw together but I'm unsure how many more good days to test I'll have this year if...
Here is a link to the full set of Nexus MT measurements, these are taken with the new crossover modification. I've got the full polar response...
Ok, I'll be sure to export those instead, I wasn't sure which set of files were best. Here is the full set of polar response measurements for the...
I just ordered the PCBs for these so I expect it will be a couple weeks before those come in. I'll be sure to post here when those boards do come in.
Yes it's perfectly fine to build the cabinet with a straight back instead of angled at the top. There is no need to change anything else. The...
I measured the Nexus TM and MTM on the turntable today. I still have to offload the files but I'll have the detailed measurements of those two...
Unfortunately I don't have the cabinet 3d models with metric units. I do have metric dimensions for the MTMWW tower posted here if it helps at...
There are three parts which are shared between the original design and the upgraded crossover, the 3.0mH inductor, and the 15 and 17uF NPE caps....
Edit, don't use that I'll get the merged LF data added then re-upload. Here is the updated files.
I managed to get measurements for the Nexus Center today as I was going to be taking measurements on some other speakers. I didn't get a chance...
Option A is better then option B. The main limitation in dispersion when placing the speaker sideways like that is the driver to driver...
I've created a separate thread for the HT-12 upgrade crossover with full measurements of the new crossover which can be found here:...
Erich normally throws some disconnects in with the crossover parts. If you could not find them the compression drivers use 1/4" and the woofers...