Separate names with a comma.
Creating a separate thread for this as not the clutter the main HTM/HT thread. There seems to have been some confusion about this crossover and...
Should not pose too much of an issue.
You could use the inuke for the titans just disable any filters on the inuke and let it run fullrange as the crossover/processing is handled by...
Sawdust and wood glue should be enough, there isn't much pressure in the cabinet and you don't need it to be 100% air tight. Small leaks won't...
My goto has always been recycled denim insulation but that's been hard to find for the past couple years. So I just use polyfil and/or acoustic...
You don't have to be super accurate with the tuning, I usually round things to whole or common fractional numbers when giving ports sizes and...
Yeah the Celestion compression drivers use standard 1/4" quick disconnects.
I'd use acoustic foam, fiberglass or mineral wool, you probably want about 1.5 - 2" thick material. 5lbs should be enough for two cabinets.
Nope, that should be perfectly fine.
Not really a noticeable performance gain between those. The compression drivers were swapped out because the QC on new batches of the original...
The on axis frequency response of the upgraded HT-12 should actually be better then the HTM-12. Though the HTM-12 will have slightly better...
XPA-3 would be perfectly fine unless you have an absolutely massive room (10,000+cuft), even then it may be enough depending on the listening...
These crossovers would be a totally separate entity from the HT-12 kit on DIYSG. It would be difficult to substitute the crossovers because while...
Not likely, the original crossover is designed to be value oriented, fairly simple and easy to put together even without the PCB. This one is...
For current HT-12 owners; would anyone be interested in an HT-12 upgrade crossover? It involves a near complete redesign of the crossover (taking...
Those measurements are performed 4pi and the bass does roll off slightly quicker then what is to be expected with the speakers placed in a room as...
Yes a bit smaller then the HT-8, though they aren't exactly a brand new they were done around the same time as the other HT designs they just...
Added the Argos MTM.
HT-88 Measurements... This speaker isn't done but I'm reserving the post anyway.
HT-6 Measurements...