Separate names with a comma.
HT-8 Measurements: [ATTACH] Horizontal Off Axis: [ATTACH] Horizontal Off Axis (Normalized): [ATTACH] Horizontal Polar (normalized): [ATTACH]...
HT-10 Measurements: [ATTACH] Horizontal Off axis: [ATTACH] Horizontal off axis (normalized): [ATTACH] Horizontal polar (normalized): [ATTACH]...
HT-12 Measurements: Measurements taken outdoors at 2.83v/2m 4pi, measurements gated so resolution below 200hz is poor. I'll try to add a ground...
I recently finished up a new larger motorized speaker turntable I've been planning/building for a while: [MEDIA] So now I'm finally slowly...
Yeah foam and polyfil are going to be the easiest to find. Though fiberglass works just as well as the denim and if you are worried about the...
Separate post for this but there are a couple minor mods to the crossovers I will be posting shortly based on Erin's data to address to slight...
Here were my findings on the AVS thread for the review which is where most of the discussions took place:...
You should be fine the line with walls with the mattress topper and if you want add the poly-fil in the top portion of the cabinet behind the...
No that should not cause too many issues.
Four sealed boxes would be the easiest to integrate together. Ported subwoofers have a phase shift /rotation as they approach their tuning so...
Yes the parts are the same between those versions, the cabinets is the only difference. Volt-6 atmos uses 1/2" cabinet with a 3/4" baffle. I...
I treat the bottom of the waveguide as the acoustic center. Yes there are some directional cues coming from the woofer but most are provided by...
One of the bass enclosure options for the 818LX is a VBSS style enclosure but the designs do not use the same woofer. The midrange driver is...
There are minimal performance concerns removing it, you may get a hair more output in the top octave. That said it's glued on so I don't know if...
You can use a pair of 2.0uF caps in parallel to replace the 4.0uF. I also posted on AVS forum that I am willing to order some of the larger...
I think you meant the Vortex-12, that is the smaller version of the Vortex-15 and uses the Celestion CDX1-1731. The Volt-12 I did uses the...
Assembly: Glue components to the correct positions on the board (hot melt glue works great). Secure inductors with non metallic cable ties....
PM sent.
I have a feeling most of that bump he saw was room/placement. That said the difference between 4.3 to 4.7 won't be huge but you would want to add...