Separate names with a comma.
Yeah the R6.7 is just about perfect for the HT-8's and HT-10. One roll is enough for two of those enclosures. R13 is a little too thick for the...
The acoustic foam tiles will work if you can't easily get the denim. Poly batting can work as well if applied thick enough, I would go a little...
You obviously get the point source advantage with coaxials, since the woofer and tweeter are concentric there is no change in the time alignment...
The Vortex-15's aren't gone yet, they are just off the site at the moment. This is due to a couple of factors, very low sales being one (with...
Recreated the Flex-12 thread here.
Trying to copy things over from the now long gone AVS thread. I may need to re-upload images if they break. Let me know if everything displays...
The HT/HTM will work very well as surrounds with the Titans.
It should be more then enough for a room that size. You could probably double the dimensions and still be fine.
Yeah bass is often placement and room dependent but I would say it should be hard to find a place where you can't get good bass from the 818's...
You can certainly use both the sonic barrier and the acousta-stuf, just try and line the walls with the stuf rather then just loosely pack it in....
Hi Bruce, I do have some Fusion-15 PCB's that I could sell you, no assembled crossovers but I could build them if needed. Erich's info is kind...
HT-8 Crossover assembly walk-through. Note this same crossover assembly process is applicable to any of the other kits. The parts all laid out:...
Sorry I didn't reply sooner. A sealed Vortex-12 over a sub would be a simple design assuming you have the ability within the control the...
Fusion-15 wins in output just from it's greater displacement capability. I know a few on AVS forum have built them in larger tower enclosures...
If you are using any kind of modern AVR with room correction or even basic EQ I'd suggest building the WMTMW center if you are set on that design...
Reversing the polarity on the tweeter would normally cause a large hole in the frequency response around the crossover. Unless your woofers were...
Depends on which Nexus design you are comparing it to but in general the HT-8 will be capable of more output and have better imaging then any of...
My driver is much older, 15-190 (I'm guessing it's year and day of manufacture?). I pulled my driver out and tested it a bunch of different ways...
What are the full specs from your DATS measurement? Sometimes the individual values can look like they fluctuate wildly but often the modeled...
HT-8's will blend just as well with the HTM-12 as they do with the HT-12. HT and HTM lines can be used together seamlessly.