Separate names with a comma.
If you make the port full width (15.5") x 1.5" high x 4" long you should end up with roughly the same tuning. No issue putting it on the front of...
I can't speak to sound quality differences since I have not heard Paul's Speedster design. From a performance perspective I suspect the Argos...
As long as there is enough clearance in your cabinet between the internal port opening with the port at the correct length and the woofer magnet...
Your design will certainly work well. I just figured keeping size to a minimum would be one of the main goals for an atmos speaker which is what...
Dispersion of the SEOS designs is approximately 90 degrees horizontal (+-45 degrees). IIRC vertical is around 30 degrees (+-15) on the HTM-12 and...
If you want to make one really compact for atmos use you could build it at the same 7" x 10" baffle size but make it sealed and only 5" deep....
The tweeter can be on the bottom. It won't really change anything as long as your listening level is roughly equal to the tweeter. As I have...
Glad to hear someone else has come to enjoy this speaker design.
You could build a box just containing the woofer with the waveguide free mounted on top but it needs to be taller or deeper then the stock flat...
I forgot to get measurements with the new crossover updates but there isn't a huge change in the shape of the response from the older crossovers...
I only have two PCBs for those left and one may be spoken for but I'll likely get more made up soon.
That enclosure for the Vortex-15 is 17" wide x 44" tall x 18.5" deep. I used two 4" ports 4" long (flared ones parts express sells) on the rear...
Argos MTM Finally got around to finishing this one up. Much of what has been said about the TM applies to this one as well. The main...
The Argos design is a compact 5" two way bookshelf using the Faital Pro 5FE120 and the Beston RT002A ribbon tweeter. This small bookshelf speaker...
Using a separate subwoofer with the Vortex-12 would allow you to more easily control the bass level and dial it up or down to your preference. If...
Yes that's correct.
I measured the 15" overall depth at 8.25", but I'd round that up to 8.5" just to be safe. You can subtract a 1/2" if surface mounting.
The main advantage the Vortex-12 has over the Vortex-15 is that it is smaller. So you can use smaller baffles and smaller enclosures for equal...
What values do you have access to? It's easier and more economical to use two capacitors in parallel to get the correct value rather then placing...
That's correct, actually anywhere between 0.45 and 0.55 ft3 would work just fine.