Separate names with a comma.
The Volt-6 v2 PCB's should be included with the kits, did you not get any?
Does not matter, they should be the same value.
The HTM-8 is 12.5"W x 16.75"H x 8"D. Though it may end up being 7.5" deep if Erich chose to go with 1/2" Baltic Birch for the flat packs on those.
Usually you don't need it when placing them behind an AT screen unless you want the even more relaxed/softer high frequency response.
It's listed as R1 on the schematic but on the PCB it is placed in the LF R1 spot.
Creating this thread to link good examples that show flat pack cabinet assembly for future reference. If you have a build thread that details...
Those tiles should work fine.
It is closer to being listed I promise, I believe the flat packs are getting cut shortly. 10" center channel first, maybe an 8" as well but...
Sorry it's a bit confusing I'll need to clarify the post. The SD215A-88 are dual voice coil woofers so the voice coils should be wired in series...
Port for the TM is left full length when using the 1-5/8" flared port 260-474 from parts express. Also for future reference I noticed a had made...
You don't have to do anything special to any of the passive crossovers on the Volts if you run the woofers in an infinite baffle. That said the...
I thought I would throw this up here to perhaps answer some questions people may have during crossover assembly and help cut down on the number...
I might have couple left but I am also going to be changing the crossover a little bit as well and that crossover PCB won't really work as well...
This was answered on a different forum but I'll add the info here as well for future reference. The manufacturer or brand of the components may...
Fixed the dead images on the original post.
Yep that's it. If you have a version of Dynamat with the foil backing you need to make sure the crossover stays elevated off that surface. Or...
All you need to do is connect the 400uF capacitor in series with the woofer, so attach one end of the capacitor to the positive side of the LF...
The response of the DE10 on the SEOS-8 won't really be identical to the DNA-205 in the EOS-8 which is a deeper waveguide. A crossover with the...
Might be something like needing 5-10 posts before being allowed to insert images.
Hi Gaston, It looks like Parts Express will have the SD215 in stock on May 8th, not August 5th. If you can wait a month I'd use those drivers as...