Separate names with a comma.
Looks like everything is correct as far as the wiring goes on that PCB.
I want to say they worked well down to 700-1000hz, I can't really remember the exact number and unfortunately I never took screen shots while I...
Yeah it's a basic estimate on what kind of distances you can expect to reach reference levels with an AV receiver that will output 100-150w vs. a...
More detailed build description: For the enclosure using 3/4" thick material, Front and rear baffle: 11.75" x 8" Sides: 11.75" x 8.5" Top/bottom:...
The AlTi is an inexpensive 2-way bookshelf design using the aluminum cone HiVi M5N midbass and Dayton DC25T-8 titanium dome tweeter. You can...
You can just mount the baffle to the ceiling if you want. The IB install will give more bass extension then the small atmos box. Here is a...
Theses are the ports used in the ported flat pack option:...
The ported enclosure would be a little large for wall mounting for most people which is why you don't see an angled ported flat pack option. There...
This would be a good design for a soundbar, IIRC tuning would end up in the 65-70hz range. The PR design does not give you quite as much bass...
Yeah same drivers, likely just a couple tweaks to the crossovers.
Crossover points on that one are 450hz and 2200hz. Not a Zobel on the woofers, the resistor just damps the 2nd order filter softening the knee...
Rockwool would be the most effective of those, if you are not opposed to using it regular fiberglass would work as well. I do have crossover...
You are correct the ported Volt-8 does has more extension in a similar or smaller cabinet then the sealed Volt-10. If you are not going to be...
Sorry for the delay. The Volt-6 has essentially no BSC While the Volt-8 and Volt-10 have about 2.5dB. Since placement near boundaries is likely...
The limiting factor for depth is the compression driver and waveguide which is 5.5" on the HTM-6 and about 6" on the HTM-8 so you could probably...
The waveguide in the titan design was an existing product so no custom tooling was needed. I am sure if a mid/tweeter waveguide like you...
I'd suggest the Volt-10's for that, they will sound the biggest of the three. The Volt-10 should be a pretty big jump from the volt-6 in terms of...
The HTM-6 is 13.5"h x 10"wide x 7" deep. I don't really know what the dimensions of the HTM-8 will end up being. My guess is somewhere around...
Here is photo showing HTM-12, HTM-10 and HTM-6: [IMG]
Still don't have a sample for the woofer that will be used in the HTM-8, it will likely end up being a totally custom driver from Eminence. Good...