Separate names with a comma.
If you ordered the kit with the stock baffle you can just build the box 6.5" deep which will maintain the volume of the angled enclosure, but it...
This design was done for NWCgrad over on AVS forum. He inquired about using the beefier PSD2013-8 compression driver on the back of the...
No problem Rajdeep, it was nice to have someone stop by for a listen. Ryan, just let me know if you will be visiting the Chicago area at any...
I would recommend the volts for this, the coaxial design will give you even coverage no matter which direction you are from the speaker. The...
No I suppose not. It will work sealed if you were to use a 120hz crossover, in that case you could get away with a 0.1-0.2cuft enclosure. The...
Hi Bryan, The woofer will work sealed between 2-4cuft (F3 right about 80hz), it could be as simple as cutting the bottom portion with the port...
Those are internal enclosure volumes.
Really looking good. I don't think that gap is too bad, I had a similar sized gap around the waveguide on my enclosures for the MTG-08 design and...
Yes though you may be able to use the DNA-360 settings from the PM you will get in a few minutes that have the JBL 2226H crossover. The TD15M...
I don't know if there is anything that would be a drop in substitute, the Celestion CDX1-1010 might work with some minor adjustments to the...
I'd say you can start with those then adjust EQ on the CD so that the response is flatter with the SEOS-15 and you may need to adjust delay on the...
What kind of design, active or passive? What if I were to say both already exist :eek: [IMG] [ATTACH] [ATTACH]
Re: Fusion-15 Assembely Info and Tips Thread reserved
Post will be updated to include more info soon. If you have questions about your Fusion-15 build feel free ask them here. [IMG] [IMG] Design...
Q: What is the depth of the Volt drivers with the DNA-150 compression driver on the back? A: The Volt-6LX with DNA-150 is 4.75" deep, or 4.375"...
Enclosure Damping I recommend lining the walls of ported Volts with 1 to 1.5" of the material of your choice leaving 3" or so around the back of...
This post will be updated as more info is added. If you have a question about a certain aspect of your Volt-6/8/10 build feel free ask them here....
You could place two or more in series or parallel to get 25 ohms if you don't have the exact value.
It may appear textbook, but loudspeaker drivers don't have textbook flat frequency response and impedance profiles, acoustic crossover is still...
It is highly unlikely the levels at 30Hz in almost any genre of music will be as high as those in the midrange so you will clip the amp before you...