Separate names with a comma.
From what I can see it looks good.
I think it looks good, connections are correct as far as I can tell.
I picked up a couple of those from the PE tent sale this year. I planned on doing something with them but who knows when I'll get around to that...
Hmm.... $1000 in speakers does not leave a lot of choices for a 7.1 system. You could possibly go with Karma-10's for your LCR and Karma-8's for...
What is your budget for the speakers? Any size limitations for surrounds (or behind the screen)? Do you want to build your own enclosures for...
I just finished up this design for countrywv he sent in the 4550 and I had a TD12M from Brain6751 who sent that over for a in wall project that...
I usually try to start with whatever gives me the best phase tracking through the crossover, but the second order with notches gives me a little...
These should be pretty close to the passive design, Woofer: 3rd order BW 650hz EQ: 500hz, -2dB, Q=0.5, 1100hz, 6dB, Q=1 1600hz, -20dB Q=3...
I have a somewhat similar dip on my measurement even with the port sealed. The port resonance with the slot ports included is around 1700hz, it...
If you are crossing over to a sub model with a highpass filter. IIRC most avr's use a 2nd order highpass on the speakers and a 4th order lowpass...
1100-1200hz may be a little low for the DNA-205 when run at higher volume levels. I dug up two of my measurements for the 8PS21 and both show...
Probably close enough that you would not notice with the playback of regular material.
I am switching the current Dayton (JBL clone) waveguides and DNA-150's that are on it out for SEOS-12's and DNA-205's, woofers will stay the same....
6" foam roller. :)
Thanks, paint is Rustoleum oil based flat black. I like that it goes on smooth and is very durable when dry but it does stink and cleanup is a mess.
They seemed to be well packed when I got them from PE. Everything was double boxed and the P-cores were in their own box separate from the other...
The Cheap Thrill does sound like a good candidate for you, come within your budget, have the needed oomph to get the job done and are the current...
It's not too bad, you have them point the right way as to minimize coupling. If you are worried about it you could always flip it over so it is...
Can't view your picture, makes it a tad hard to answer :o
The port should be 1" high by 6" long, so cut the internal port panel 5.25" long (+ 0.75 for baffle = 6"). You may be able to use the bottom...