Separate names with a comma.
Re: DW-774S/DNA150 + Celestion TF0818 design/build I got all the correct parts and rebuilt the crossovers on new boards. They are nice and pretty...
Re: DW-774S/DNA150 + Celestion TF0818 design/build Mine may not be the best example becuase I used parts I had on hand and re-used an older...
Re: DW-774S/DNA150 + Celestion TF0818 design/build Yep, passive crossover no need for anything extra, most of the time I run them off an old...
Re: DW-774S/DNA150 + Celestion TF0818 design/build These will blow any HTIB speakers away, a huge step up. I think most* of the new designs will...
I can tell you firsthand they do excellent in back yards. :)
Re: DW-774S/DNA150 + Celestion TF0818 design/build I think these will fit your goals rather well. How do you plan on using it for the center?...
How did I miss this, that's awesome. Too bad I don't have the room in my shop area of my basement for any more stuff, so on the wall my clamps...
Re: DW-774S/DNA150 + Celestion TF0818 design/build If I think of something to add or change with the page I'll be sure to let you know. Only...
Re: DW-774S/DNA150 + Celestion TF0818 design/build That looks great :) Those are the cutouts for the 1.5" ports right? 3/4" is fine, I kind...
Re: DW-774S/DNA150 + Celestion TF0818 design/build The advantage to slot ports is that you can get them to fit where the round ones don't. I...
Re: DW-774S/DNA150 + Celestion TF0818 design/build Velocity max is at 65hz (70hz tune) putting a 2nd order high pass at 80hz does limit it to...
Re: DW-774S/DNA150 + Celestion TF0818 design/build Hmm, the air velocity reaches 60 m/s (200ft/s) with 100 watts input, there is going to be lots...
Re: DW-774S/DNA150 + Celestion TF0818 design/build Cool, did you end up using a round port/s or did you go with the slot port? Edit: I guess...
Re: DW-774S/DNA150 + Celestion TF0818 design/build Go to electronic components and in resistors they have 5/10/20 watt wirewound by Xicon,...
Re: DW-774S/DNA150 + Celestion TF0818 design/build I am listening to it right now with just the resistor change and that brings down the...
Re: DW-774S/DNA150 + Celestion TF0818 design/build Those part numbers would be 266-558 for the 3.0mH inductor and 016-1.8 for the 1.8ohm...
Re: DW-774S/DNA150 + Celestion TF0818 design/build I was doing some more listening to this one, and think some slight changes can be made to the...
Re: DW-774S/DNA150 + Celestion TF0818 design/build Ok, looking forward to someone else's impression.
Re: DW-774S/DNA150 + Celestion TF0818 design/build A 3" would work 4.5" long, but air velocity is a little high, two 2.5" ports 7" long would be...
Re: DW-774S/DNA150 + Celestion TF0818 design/build Ha, I never thought of doing it like that :) Should be able to get some up today.