Separate names with a comma.
You can use a pair of 2.0uF caps in parallel to replace the 4.0uF. I also posted on AVS forum that I am willing to order some of the larger...
I think you meant the Vortex-12, that is the smaller version of the Vortex-15 and uses the Celestion CDX1-1731. The Volt-12 I did uses the...
Assembly: Glue components to the correct positions on the board (hot melt glue works great). Secure inductors with non metallic cable ties....
PM sent.
I have a feeling most of that bump he saw was room/placement. That said the difference between 4.3 to 4.7 won't be huge but you would want to add...
It was for aesthetics, I didn't care for the look of the round ports on the front (I liked how clean it was with just the driver) but ports can...
Horizontal offset won't matter with the cabinet being so close to the diameter of the driver, the minor change in distance to the cabinet edges...
There are more of the coaxials, Erich limited the number available for purchase to the number of compression drivers he had set aside not wanting...
I did design these in larger cabinet which gives them better extension then the HTM's and even the Titan's with the thought that they would be...
Yes the red mark indicates the positive terminal.
All the parts should be able to be purchased at Parts Express but I have not checked if any of the values are currently out of stock. You could...
Well you will still be at the 17" wide cabinet it's just turned sideways, the length and depth don't matter as much. Again having the driver...
It will likely alter the response a little bit but it won't be too big of an issue.
You might be able to get away with two of the Dayton RSS390-PR Passive Radiators without added mass, those result in a tuning right around 35hz in...
Here is the original enclosure I used to design the crossover. [ATTACH] The ports were added to the rear about 9" from the bottom to the center:...
It will mess with the baffle step a little bit yes, but if you are using these for a home theater and will be using some kind of room...