Separate names with a comma.
Technically the latest crossover has only been tested on the WTMW center configuration. The same crossover should work for a vertical WTMW or...
In that case it doesn't really matter which way it is placed.
Yes that configuration will work fine. If all three speakers are going to be placed like that make sure the L/R have the woofers positioned to...
You can add the capacitor if you want, it's really even optional for the Atmos flat pack. It does help extend the bass response a little and...
No issues making a youtube build video. I've added the new updated crossover schematic and parts list. Feel free to make 3D drawings of the...
10w resistors should be fine unless you plan on driving them at high power levels for long periods of time.
The Volt-6 v2 PCB's should be included with the kits, did you not get any?
Does not matter, they should be the same value.
The HTM-8 is 12.5"W x 16.75"H x 8"D. Though it may end up being 7.5" deep if Erich chose to go with 1/2" Baltic Birch for the flat packs on those.
Usually you don't need it when placing them behind an AT screen unless you want the even more relaxed/softer high frequency response.
It's listed as R1 on the schematic but on the PCB it is placed in the LF R1 spot.
Creating this thread to link good examples that show flat pack cabinet assembly for future reference. If you have a build thread that details...
Those tiles should work fine.
It is closer to being listed I promise, I believe the flat packs are getting cut shortly. 10" center channel first, maybe an 8" as well but...
Sorry it's a bit confusing I'll need to clarify the post. The SD215A-88 are dual voice coil woofers so the voice coils should be wired in series...
Port for the TM is left full length when using the 1-5/8" flared port 260-474 from parts express. Also for future reference I noticed a had made...
You don't have to do anything special to any of the passive crossovers on the Volts if you run the woofers in an infinite baffle. That said the...
I thought I would throw this up here to perhaps answer some questions people may have during crossover assembly and help cut down on the number...
I might have couple left but I am also going to be changing the crossover a little bit as well and that crossover PCB won't really work as well...
This was answered on a different forum but I'll add the info here as well for future reference. The manufacturer or brand of the components may...