Separate names with a comma.
Might be a little while, going to be working on getting a custom neodymium motor 8" driver made for it but have yet to get any samples. The HTM-6...
The woofer used is the last of those three part number 295-484. Unfortunately you can't switch the drivers without a complete redesign of the...
I have not directly compared the HTM-12 to the 1099, that said the HTM-12's sound is similar to the Fusion-15 so I would look to the comparisons...
Thanks, The HTM-10's might give you a little more chest thump over the Fusion-8's as I did design them with a little bit of a midbass bump but...
While I think the Volt-10's might have the sound you are looking for and while I have tested them with about 400w input which they handle fine I...
The inside flares likely won't be an option, I have a bunch of port samples here that do have inside flares but none are the correct size/length...
There will be pre-assembled crossovers offered soon. The kits will come with a single 1" thick baffle which does not need the inner baffle...
Added that info to the first post.
Was working on getting those off my laptop, added the on axis, still need to process the off axis files. Some other HTM photos added here since...
Thanks. Gross internal volume (not subtracting for bracing or drivers): ~1.8 cuft for the HTM-12 ~1 cuft for the HTM-10 ~0.375 cuft for the...
More info... Damping info, (for HTM-6 see post #4) I had used R13 Ultra touch recycled denim insulation in my HTM-10 and HTM-12 boxes covering...
This is the official thread for the HTM (Home Theater Monitor) and HT (Home Theater) series of speaker kits. 2020 Update: The HTM-6, HTM-8 and...
Sorry I missed your first post with the crossovers troubles, I forgot to jump over the this forum for a couple weeks but I am glad you got it...
A 1/4" is fine, it's the small compression driver that will be protruding the most off the back. You might have to bend the input terminal a...
I'd say if you can get them to fit you should go with the Volt-10's all around, they are the best suited of the volts for IB installation. You...
The last 3 pictures in the first post are of the current crossovers, first of those show a Volt-6LX which has a physically smaller capacitor for...
There are no crossover differences between the difference cabinet/baffle configurations. The main thinking here is that the exact positioning and...
Yes that is correct.
The Volt-6 would be more then enough to keep up with your Klipsch mains and it's smaller size and weight makes positioning and mounting easier....
Yes the port flares are a decent length themselves. The proximity to the front of the cabinet is intended, it increases the effective port length...