Separate names with a comma.
Re: Project NEXUS... All that info is in the TM/MTM post, Volume should be ~0.3-0.4 cu ft. Baffle is 6.5"W x 15"H.
Re: Project NEXUS... I am not sure if the panel brace will fit unless you run it vertical in the box. The diameter of the port might be too...
Reseved
Re: Project NEXUS... The MTM does have a few advantages over the TM, Using two woofers you get 6dB more output headroom and at the same time...
That's up to Erich, I really like this design especially with the new crossover. The design using the EOS-8 waveguide fits in the same enclosure...
I played around with this crossover some after I learned a few tricks working with the DNA-150, Here is a new crossover using only 6 parts that...
Yeah that should work fine.
Re: Project NEXUS... ^ thanks Updated posts to include more info.
Re: Project NEXUS... MTMWW tower / WTMMW center design, could also be configured as a WMTMW design Edit: It comes to life at last! This design...
Re: Project NEXUS... WTMW Center Edit: Could also be built as a vertical WTMW sealed or ported [IMG] This 3 way design uses two of the Dayton...
Re: Project NEXUS... TMW 3-way design - Update, no real advantage with this design when compared with the MTM and far less cost effective.
Re: Project NEXUS... (Warning photo heavy, lots of graphs and schematics) TM/MTM designs Update 1/13/17, Enclosure and crossover redesign for...
There is no real limit on how low you can cross the DNA-360, if the levels are low enough you could run it without a crossover at all without...
Timbre matched family of Hi-Fi/HT speakers all based on the same midwoofer (Dayton DS135-8) and tweeter (ND28F-8). These designs came about from...
You could switch them but the result may not be as good as just using the SEOS-12. There is a slight difference in frequency response of the...
Wow, I am off today ;D I have attached a new schematic that will work with the 360/350 which closely matches the 4550 response.
Sorry saw your post then forgot to reply, The 350 should work fairly well, it won't match the final FR of the 360 exactly but it will be close...
I am glad you are doing well Bill, The timing was unfortunate as I had hoped to finally meet you during my stay with Erich but your health is...
The EOS is too deep a waveguide for a dome tweeter, you would want a shallow waveguide like the DW-62S for the best results. Too deep a waveguide...
For medium sized boxes (like this one) and larger I use the ultra touch denim myself. I try to leave plenty of room around the back of the woofer...