Separate names with a comma.
Re: DW-774S/DNA150 + Celestion TF0818 design/build I put another coat of black on these today. Here is my painting booth: [IMG] [IMG] I...
Re: DW-774S/DNA150 + Celestion TF0818 design/build I should note that the gun is $22 from menards, I was thinking of the one I was going to get...
Re: DW-774S/DNA150 + Celestion TF0818 design/build I have seen the light! Never again will I use the rattle can for speakers and the roller will...
Re: MTG-06a-OWS Need some copper to finish these, I have a stockpile of caps and resistors but ran dry on most coils. I am also waiting to figure...
Re: MTG-06a-OWS I think I will go with the third order crossover it is only an extra $5 per speaker over the 2nd order and goes down to $4 when...
Re: MTG-06a-OWS Here is the Indoor on wall vs outdoor free space driver measurements: [IMG] Looks like crossover region and above is mostly...
But you don't want to be so close that it will make you way off axis from one or both drivers while measuring. I think I would call that 2nd...
Re: MTG-06a-OWS Some crossover work done, I have two versions: Third order on woofer (Flatter, but uses 3 more parts) [IMG] Second order...
Re: MTG-06a-OWS Boxes glued up checking how it looks on a wall: [IMG] temporarily mounted on wall so I can stand back and see how it looks:...
Well you sure are not going to get the paraline through the 1" throat on the SEOS without major compression in the lower midrange just not enough...
This one is pretty good:...
Why do all that work, just go with a BA driver and be done with it.
Re: MTG-06a-OWS I have used the Aura before in a small bookshelf (0.25 cuft sealed) with a 3/4" dome. I thought it sounded real nice and the bass...
Re: MTG-06a-OWS It is close but does not squeeze through. I am just going to cut an access panel on the back. Another way would have just been...
Very nice. I wish my phase looked like that.
Re: MTG-06a-OWS Thanks The woofer diameter with roundover (3/8") is about 6-1/4", cutout is 5-7/16", inside recess for woofer is 6-3/8" (1/4"...
Re: MTG-06a-OWS Got the chance to work on these a little more tonight, finished the waveguide cutouts and then started gluing. Here I am...
Re: MTG-06a-OWS Close but both those don't work well in an enclosure this size. I guess I'll give away the details. In order to make it as...
Re: MTG-06a-OWS Bill's got it, on wall surround. You'll know the drivers once you see them. I have used them indoors, I just don't have a...
Re: MTG-06a-OWS Aww Bill landed on bankrupt, lets go to the next contestent. ;D I actually got inspiration from your sled, mixing the toggle...