Separate names with a comma.
All the best wishes to you Bill for the best recovery possible~!~
You are correct sir!
Mike has given great advise. Go forth and follow the "map" in the schematic as if you were tracing each of the routes to their destination....
Sounds like you have plenty of room and nearly enough budget for three Cheap Thrills.
Excellent, sounds like you can fix that with some sanding and putty. Routers are really cool (albeit they are a bit dangerous) they expound the...
Get at least two 90 degree corner clamps, four if you can spring for it. The baffle I received was 17-1/2 x 26-1/8 If you do not have a router...
As much as I experiment, nothing is forever. So I use crimp-on's.
Looks correct to me, test before soldering.
Back side View.
Top View. Tweeter network on top, woofer on bottom.
1) Correct - no ports on the current baffle 2) Get the round overs! They look better, and you would need a router to do them yourself. 4)...
http://www.diysoundgroup.com/flat-packs-1/seos-flat-packs/2-cuft-tall-seos-flat-pack.html That flat pack is for a 14.5" baffle. The buyout...
I went with the sealed box design in the attached picture, I did skip the inner baffle. The bass is very satisfying, but I can't help but wonder...
Well, I’ve only completed one speaker so far. So my listening impressions are based solely upon listening to music in mono on Big Daddy. If only...
login for Speaker p0rn. Big Daddy next to Zaph ZMV5.
The grills are toast.... Ugh! Some lucky charity may be getting those and some misc. buyouts... Those are my Zaph ZMV5 stands. :-X As much...
I am not so sure if the grills will be permanently mounted.... :o
Finally have both speakers almost finished. Close enough to include this action shot. I added 1/3 lb of Polyfill to each speaker and...
No worries, I've got plenty to keep me busy.
Couple of build pics.... Decided to build the crossover so it doubles as a shelf above the ports to extend their length. The top, bottom...