Separate names with a comma.
Bill, It's good to know
Big thanks to you Bill. Let me know if you have any new horns coming up. I'll certainly make them.
I keep on modify this horn to spec. as close as possible and end up I have better response at high frequencies. I even have better response on...
Bill, Yes, they are all -3db/division. Yes, they sound absolutely fantastic if compare to all speakers I built before. My wife gave the same...
Hi Bill, As you can find on the graphs that there are still some serious dip at 2300 and the roll off above 10k. I did try serious EQ on both...
Hi Bill, The last couple weeks were the funniest and hardest weeks for me. I had been busily working with the crossovers and together with the...
Hi Bill, Thanks for the guidance. I'll try everything recommended. Let you know.
Hi Bill, Here come the two graphs I took at 2.48K and 390hz, both are with 1/12. It seems to me that they're right at both ends of the mid...
Hi Bill, I'll try post the pictures asap. The crossover I'm using is the one on V.5 of which I direct copied the high and the mid.
Hi Bill, The holes are 5/8" and you can see how I cut them at few post back. The dip like a deep valley down to the bottom and gradually come...
WAF is the same over here. I'm lucky to have a full basement for all my hobbies. I only can make speakers in summer months and lots of rain,...
Hi Bill, I crossed the woofer at 380 hz. They sound good to my ears and I have to cut about 3 db down on the 2510 to suit. Learning how to do...
I finally have the bassbox done with Deltalite 2510 in 1.6cu.ft tuned to 60hz. They sound amazingly good and I like the sound stage wide and open....
Painting is done. Crossover is pending for parts. Should be in very soon.
I've done something during the weekend. Please do comment if there is anything I could do better.
I've been busy with my limited skill and this is what is up till now. I've found difficulties on those flares angle. Might take a little bit more...
Bill, Big thanks
Bill, please advise on one capacitor for the midranges, It said 18uf on your crossover schematic with PE#027-432, the number is for 15uf. Should I...
Big thanks Bill, I'd put the 10"woofer close to the horn. Will let you know how it goes. Albert
Bill, Thanks so much to share your effort and I really appreciate the details and the latest update. The passive crossover is what I like the...