Separate names with a comma.
Have you tried to power the speaker from only one channel of the amp? I would think that while 15W may not be enough for your long term use...
This might be a delicate topic - and I might be way out-of-bounds, but are you familiar with horns-diy.pl ? Auto-Tech (at that URL) sells SEOS...
I made some measurements before I decided how I wanted to build my Volt10LX cabinets. I ended up with an internal depth about 5.5 inches, maybe...
I'm not 100% confident you've got the right specs for that driver. The image looks like it's a dual voice coil driver, but the specs just show 4...
Turns out I had done a poor job soldering one of the components, and it was only very loosely making contact. I fixed it. :)
I'm just getting started with my troubleshooting, but maybe someone has messed this up the same way I have and can point me in the right...
Toe-in is required for time-intensity trading, which broadens the area in which stereo imaging is stable and convincing, but it not always...
Your speakers are not the problem - most likely. You could try to adjust the level trim for the center channel. That would bring up dialog (in...
Why do you want a waveguide? What does it need to accomplish in the design?
I'm not some kind of expert, but I think we need more detail. The peak voltage out of the headphone jack is set by the controller in the phone or...
On the other hand - if the size is a real problem, DIYSG doesn't have too many options. You could go with something like this...
There are probably better explanations available, but let me get you started. The resonant frequency of the port, which defines its tuning, is...
Oh, that's a bummer. Maybe there's two problems with one solution: paint. But please keep the burl. It's awesome.
Thanks so much for all these details, Matt. Do you suppose that a sealed Volt-6 would be impossible, even with a 120Hz crossover?
Hi Mike. Do us a favor and post some pictures along the way. :) The waveguide and tweeter do not need the box to function perfectly well, so...
I'm unaware of any complete step-by-step instructions, but you can work it out, I'm sure. I'll share some thoughts below, and maybe that'll...
Do you have the waveguide on hand? I think you would want to wait until you do, if you don't have it already. Ryan has some pretty good images...
Marc, you can do that - but with some consequences. It looks to me like the components will physically fit in the box if you shrink the depth, so...
I think you'll find that this sort of psychoacoustic effect is based on reflected sound and reflection timing and intensity. Good...
The pro amp (that one and most) is stereo, with independent gain adjustments but no phase or delay (on that particular model). So that's a...