Separate names with a comma.
VB=10 FB=35.33 F3=38.18
VB=6 FB=43.21 F3=44.67
You are going to have some issues with the excessive offset between the woofer and the waveguide. That aside, I built mine with the big QSD...
Is the woofer completely dead or just not working properly when the resistors are connected. A shorted woofer cap would place the 3 ohm resistor...
Yep! Got me three of em.
I put them on top of my 2245h. A lot easier, looked fine, and I can't imagine any significant performance issue.
That's not much of a graph. Try again.
I think it was these: http://www.parts-express.com/pe/pshowdetl.cfm?&Partnumber=299-284&scqty=4 Made in Korea by Sammi sound. I grabbed a...
I have mine mounted with approximately 1/4 " between the drivers. The two together use 13 " of baffle width.
2 will fit on 13 inches of width.
Good thought! I can and I will try it.
It's above the TV and the TV is kinda where it needs to be.
I really had it stuffed! ::) I removed at least 1/2 of it. It raised Qtc to .93 so your speculation about volume my well be the correct one and...
It's 4 feet to the back wall. I do believe I'll remove some stuffing. Thanks.
First off, my wife may be a bigger bass freak than me. ;D The Qtc suggests the volume should be OK. The drivers are new and have had no break...
The box is sealed. 3/4 inch ply. External 15 x 15 x 9.5, .844 cu.ft. with a window brace. The predicted Qtc was .673 and the measured was .745.
My Daniel is up and running. Bill, you nailed the crossover according to my Omnimic. I watched "Hunger Games" and vocal was pretty good. My...
Zilch mentions the 2206 here... http://www.audiokarma.org/forums/showthread.php?t=150939&page=442
Very interesting! Would the D360 CD be interchangeable, or do we need a different crossover?