Separate names with a comma.
Unless you are building really tall speakers, TMM is in my opinion a better choice. It can get the tweeter on a floorstanding speaker at your...
Nice job! I don 't consider the speakers too high. When I go to a concert hall or outdoor event, I look up at the stage at about the same angle....
Actually the polarity, phase or whatever one wants to call it, is required only when the eyes instead of the ears decide speaker and subwoofer...
Hi Doug, what is the "voice range"? Middle C between the bass and treble clefs is 256 Hz, C above the staff that is only sung sometimes, is...
Loss of pattern means more room in the sound. If you want "faster" drivers for the midrange, use 2x 6" horizontally positioned. Then you will have...
Here is a woofer capable of reproducing DC - in normal sized rooms. Has quite a bit of DIY potential! http://www.rotarywoofer.com/[IMG]
What happens when you disconnect the xover and test the tweeter with only a cap in series to protect it? I had a similar case a couple of years...
Getting the most out of your speakers is as much art as science. The more science that you have, the easier it becomes to be artful....... The...
Here are my favorite links for making what I do reproducable: http://sourceforge.net/projects/speakerworkshop/ http://www.tolvan.com/...
Most of these could be well known to many of you, but for the newbie looking for stuff to read here are my favorites. I will create a separate...
I am looking to build a "full range" Econo-SEOS without taking over the living room. I found this 58.- Euro Dollar jewel of a 6" woofer. 29HZ in a...
This is what I think everyone interesed in subwoofers should read: http://www.gedlee.com/downloads/rooms%20and%20sources_norm.pdf There is no...
With subwoofers available, sealed. Don't forget that a port is only "in phase" at specifig frequencies and out of phase at others. That makes...
This is a 12" JBL clone that works in a small box. 2 cu.ft should have a -3db at around 40 hz. Here are the driver parameters:...
here is a good start http://www.rycote.com/applications/ http://www.thewindcutter.com/shop/ http://www.reinhardt.tv/ Some of the offerings...
As soon as Erich will ship to Europe I can get started on the SEOS project. Then I can provide anything that Arta can output for measurements. It...
I have been lurking for some time here/AVS and have decided to build a SEOS12/12" woofer. I have not decided on what woofer yet. I found a...