Separate names with a comma.
Thanks, I didn't see that link. I ended up getting TiteBond 3 and it is working well. Gluing up the second one now, should have them up and...
1. What is the best method for applying the straight gasket tape for the waveguide? Apply near the inside cutout or to the waveguide? 2. What...
http://www.diysoundgroup.com/forum/index.php?topic=221.0
Will this design be posted or did I miss it? Was it a challenge to tame the woofer? I seem to recall that one having a few extra crossover...
Re: Project NEXUS... Nice..... They say the measure of man is his family....... :)
No, just offering a suggestion. The difference would be negligible. Two hours is not bad....that's why I have someone else build the raw boxes...
The most space effective braces are 1" hardwood dowels. They can be carefully cut to a wedge-in length and glued in with PL Premium. I also try to...
I am also in the process of building my first pair of CT's. From what I understand if you are running these sealed w/subs and crossing 80 or...
Bill, on AVS forums there was discussion in an unrelated thread that testing by folks here revealed the tweeter polarity in the crossover design...
wvu, You are correct....it is not as difficult as you think. There are a lot of different ways to do it, don't worry too much about it falling...
Well, I finally received my second undamaged driver today (they sent a total of 5). This time they double boxed it and stuffed it to the brim with...
I didn't have to return the first one. Upon further examination I see a few more things....it looks like the cone is a little off-center and the...
I wanted to follow up with you guys on my damaged driver.....received the replacement driver from PE today, in "absolutely perfect" condition....
Unboxed my pair received from PE tonight, one was damaged and not working properly :-[ . Extremely minimal packing, not really surprised with the...
Thanks Mr. Waslo!!! And a very economical crossover to boot! This is hands down the best bang for the buck yet...... Using a 3/4" baffle,...
This is such a cool budget design! mtg.......can both drivers be front-mounted on the baffle without issue? Is there a specific driver c2c...
Tux, I don't know if you have seen this thread over at PE forums, FYI.....just so you are aware of some others' opinions about this driver....
Thanks bw. Has anyone planned to design crossovers for the SEOS 12 to work with the Dayton 10" or 12" pro drivers? I thought I read somewhere they...
Re: SEOS12 with Dayton 12" Pro Can the Dayton PA310-8 be used with the SEOS 12, if the LF section of the Econowave SR Compact crossover is...